Hanging a metal sheet

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Topic: Hanging a metal sheet Read 250 Times
  • Jeremy Roussak
    Jeremy Roussak
    Gold Member
    Posts: 737
    General
    on: December 28, 2020 at 2:28 pm

    I’ve finished a print by coating it and gluing it to a sheet of aluminium, cutting it flush with the edge of the sheet and hanging it without frame or glass. It’s quite effective and I plan to do more.

    To hang this one, I just glued a couple of pieces of wood to the back: one to be supported by the wall mounting and the other to ensure the metal hung parallel to the wall. The difficulty was getting the two hooks fitted to the wall at precisely the same height.

    Is there some kind of device that could be attached to the back of the metal sheet that could be adjusted so the sheet would hang level?

    Jeremy

    Kevin Raber
    Kevin Raber
    Silver Member
    Posts: 1037
    Re: Hanging a metal sheet
    Reply #1 on: December 28, 2020 at 6:44 pm

    I have a couple of tools I use.  Here are the links. https://amzn.to/3nY2AGr   and.  https://amzn.to/34Quz3u .  https://crescentcreativeproducts.com/products/the-hang-it-perfect-picture-hanging-tool

    Kevin Raber
    CEO & Publisher of PhotoPXL.com and Rockhopperworkshops.com

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.